Texlub Brake Fluid DOT 4

Texlub Brake Fluid DOT 4 is a high performance premium hydraulic fluid blended from polyethylene glycol ethers, derived esters and additives. It has a minimum boiling point of 270°C and is designed for use in both disc and drum brake systems, for clutch system and in other hydraulic systems for which DOT 4, DOT 3 and SAE J1703 fluids are recommended. By virtue of its high wet and dry boiling points, Brake Fluid DOT 4 offers superior protection against vapour lock especially in the early life of the fluid and is particularly recommended for disc brake systems operating at high temperatures and the most severe braking service.

Texlub Brake Fluid DOT 3 is a quality hydraulic fluid mixture of polyethylene glycol ethers and additives of minimum boiling point 232°C. It conforms to US Federal DOT 3 and SAE J1703 specifications and is suitable for use in both disc and drum brake systems and clutch systems where such fluids are specified. Brake Fluid DOT 3 is dyed red for easy identification, and offers good lubricity and anti-corrosion protection to the operating system.

Applications:

• Follow vehicle manufacturers’ recommendations when adding brake and clutch fluids
• Keep brake and clutch fluids clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake or clutch failure
• Store brake and clutch fluid in its original container. Keep container clean and tightly closed to prevent absorption of moisture
• Periodic changes of fluid in both brake and clutch systems should be carried out according to motor manufacturers’ instructions. Since the brake fluid can absorb so much water in 12-15 months that a boiling point of around 150°C and an even lower vapour-lock temperature are possible, it is recommended that the brake fluid be changed every 12 months